PULACO50GPH 3W Mini Submersible Water Pump for Aquariums, Fish Tank, Pond, Fountain, Hydroponics

The media could not be loaded. Perfect for my fountain. It has just enough power and is very quiet.

Used this water pump for a Halloween prop, and it worked great. It’s surprisingly strong for its size and ran without any issues. Perfect for small setups—definitely impressed

It is a very tiny submersible pump, but it's pretty tough. It will not pump out a lot of water, but if you need a small submersible, recirculating pump for a ten to 15 gallon tank, it'll work ok. I have hard water and that has killed cheaper pumps, so this is worth it. Plus it's small and has suction cups so you can hide it anywhere in a tank. The noise level is minimum and tolerable. The tube is a little large, but not very long. Just keep all of that in mind before buying, plus your needs. It says on the box you can use it for basement drainage, no you could not use it for that. It is way too tiny and nowhere near enough or fast enough suction power. For my needs it works great, just keep in mind it's tiny and will not pump out or recirculate a lot of water very quickly. Again, for my needs in a 10 gallon tank it works great at recirculating the hard water, and that makes it worth the price for me

Flow rate is awesome, ease of use, affordable and high quality works for my lab condenser.

It’s mostly what I expected. Arrived on time. It was perfect for our 2.5’ tall Small fountain. Could work for a cat fountain, or small to medium aquarium fountain. Is quiet and functional. After we tried it out, I couldn’t decide what I wanted to use it for because I could see more uses for it! :) The little suction cups underneath don’t work very well, but I’m happy with the price for the buy. Make sure it’s fully submerged, to protect the motor; OURS WORKS GREAT ! It’s small (1”x 1.5”x 2”), fits in the palm of my hand, and fairly discreet. The tube it came with is okay, not as quality as I had hoped, but it worked when I cut off a piece of a wide straw and put it on the inside of the tube before I attached it to the pump. Came with a couple basic attachments. It sped up a little after it started going, so watch for that so that it doesn’t overflow. Overall I’m happy with it.

Purchased Nov. 27 worked great. Today is Dec. 19 does not even trickle. bought this for a little 3 gallon aquarium to keep moss alive at the top a small piece of wood. I thought it needed cleaned because it wasn't pumping water anymore. Cleaned it and it is no better. It does not work anymore.

I’m using it in a tabletop fountain that’s pump died over 10 years ago. I’ve wanted to get a new pump for it for some time but they’re usually either too expensive or have too much power. This one is a good balance.It started up perfectly out of the box and seems to be working well for now, only time will tell how long it will last.My biggest issue with it is the lack of a coupler to connect the new tube to the tube that’s plastered into my fountain. The pump is so short I needed an extra 1” between the existing tube and the pump. Since I didn’t want to let the pump dangle, it would have run out of water too fast, I just spliced the new tube and forced it over the old one to get the extra length it needed. Colorado is very dry so even with it fully submerged I have to add water every 2 days, it’ll be daily in winter. At some point I’ll hunt for the coupler but for now this seems to be working well. I did accidentally pull the tubes apart when I moved the fountain today but it was easier to slide on the second time, it was a huge pain the first go round.I have one other fountain that I’d like to get up and running but will wait to see how long this lasts. If it’s going strong in a few months I’ll get another, but I’ll make sure to have a coupler first!If it dies in the next 6 months I’ll update my review, but for now it’s a solid 4 stars.

Perfect to replace original fountain pump.