UL Listed 3 Pin 18AWG Extension Cable for WS2812B WS2811,32.8ft/10m Low Voltage 3 Conductor LED Strip Light Wire for Flexible RGB LED Tape

Exactly what I needed for my low‑voltage setup. The cable is sturdy, flexible, and UL listed for peace of mind. At 32.8ft, it gives plenty of length without signal loss, and the 22AWG conductors handle power smoothly. Easy to strip and connect, with solid insulation that feels durable. Great quality at a fair price—highly recommend!

Easy to work with and was very useful for my led project

Came just as described! Works well for smaller peojects

I recently wrapped up a project that involved setting up outdoor RGB LED light strips. Going against the usual advice from manufacturers not to cut the strip, I found myself with no other choice for my specific setup. The real trick was to install the wires discreetly while keeping the lights working perfectly. After trying out a few different options, I stumbled upon the BTF-Lighting 32.8ft/10m 3 Pin 18AWG Extension Cable, and honestly, it was a total game-changer for the project. This particular extension cable is tailor-made for WS2812B, WS2811, WS2814, SK6812, and other similar RGB LED strip lights. Its versatility makes it a great fit for various LED projects. What really impressed me about this cable was its dependability and how user-friendly it was. I was initially pretty hesitant about splitting my LED strips, but this extension cable made the whole process seamless and stress-free. I was genuinely impressed with the wire quality. It’s 18AWG, which is sturdy enough to handle the power needs without causing any voltage drop-off. This means the LED lights work just as they should. The length of the cable, at 32.8 feet, gives plenty of room to work with, allowing me to route the cables just where I needed them, no compromises. If you’re in the market to extend your RGB LED light strips, this is the only product I’d feel confident recommending.

Pictures hopefully help. Overall happy with how it all went together. Note that this wire did not fit with the 5-pin connector. The wire with the LED strip and connector kit has a thinner insulation then this wire. I ended up soldering the wires together and using some heat shrink tubing to protect the connection. Connection to the controller was really easy as was a small hole in the bottom of the kitchen cabinet to rout the wire trough. Here are all my details as reference. WOW, what can I say - an application and product that work together and was very easy to install. That does not happen all the time. I decided on BTF-Lighting for everything to keep it simple. Reaching out to their customer support was promptly replied to with a design to fit what I wanted. Opted for the brighter strip as this is task lighting under the cabinets in both the kitchen and laundry area. Only snag I had was the wire did not fit into the connectors, just some quick solder and heat shrink tubing did the trick. Installed the controller inside the bottom of the cabinet, power supply on the top shelf of the cabinet to prevent little hands from reaching it. Attaching the controller to the app could not be easier as was the attachment to the remote. Controller, WB5 - attached to IOS Power Supply, BTF-LIGHTING AC100-240V to DC12V16.5A Max198W remote, BTF-LIGHTING LM096 RGB RGBW 4 Zone Touch RF Remote LED strip, BTF-LIGHTING 5050 RGBW RGB+Cool White(6000K-7000K) 4 Colors in 1 LED 5m Channel, Muzata 5Pack 3.3FT/1M Sliver LED Channel System with Milky White Anti-UV Sun Protection Cover Overall very happy with how all worked together for a rather easy physical install and a super easy software install and connection in IOS, I would for sure do this again in the next house.

easy to use fits good flexible wire

Not sure why BTF gives you so much of this wire you really honestly don't need it for most installation because the light strips have enough wiring at either end of the strips. That said I had to return, it never used it.

No issues with it.