Sunroof Repair Kit Sunroof Track Assembly for Ford F150 F250 F350 F450 Expedition Lincoln Navigator Mark LT Replaces # 02ESR1201ABK

This Item about a 99% great fit for my 2013 F-150 Super Crew(See Below). Make sure to watch YT Vids because there are no instructions included. Watched an hour long and very thorough video 3 times before changing out my old and brokenset. It took me about 6 hours but it saved $2000 over what I was quoted by dealership and mechanic. Take your time and refer to the YT Video often. Very happy with the end result and all open, close, and tilt functions work perfectly. THE TWO things to be aware of is that there are two screws that don't exactly match up with where they're supposed to go(about 1/8 inch off). Just be aware that you'll need to re-drill a small hole. No biggie! The OTHER negative was, like many others have said, there was no where near enough grease supplied. Tip: Make sure if you buy more grease that it's low or no odor - the greased tracks will be right above your head!! I made the mistake and it took about a month for me to stop noticing the odor. Overall, it's a decent set of track for the money you'll save!

This rebuild kit fit my 2013 F250 Lariat very well, but was not perfect. Expect to have to trim some plastic flashing from some parts to enhance the fit. I had to trim the cable holders so the cables could fit flush and slide through the track channels. Other than that, this kit is excellent!

Feels same quality as oem. Fits in the rails and lined up perfectly. Be careful pushing the connecting rod into the front guide. The little taabs break off easily. You don't want these broken pieces to lodge into the rails. The drain pan holes did not line up.I had to drill the drain pan holes to a slot style hole to line up with the plastic guides. Other than that I have a fully functional sunroof again ! 😊

The media could not be loaded. This does not fit a 2006 ford f350 as it is supposed to. The rear portion, holes for the drip pan do not line up. And is a different design. Additionally there are quality control issues with the plastics. Lots of plastic burrs that inhibit the connection of the cables to the track assembly. Not just small burrs but thick plastic that can not be easily removed. And inexpensive part kit but hours of work only to find out this does not fit the vehicle described.

Kit fit perfectly. If you plan on doing this job yourself also order a rivet gun. I used this for a 2011 ford f150

Product was pretty self explanatory, but I did have to get a tube of grease from Autozone, and had to retap one of the holes that wasn’t tapped all the way. Definitely could have better quality control from factory but works okay.

Worked great.

Worked perfect! Happy sunroof again!