Griot’s Garage Ceramic 3-in-1 Wax, SiO2 Spray for Cars, Trucks, and RV’s, Provides Protection and Water Beading on Paint, Wheels, Plastic, Rubber Trim, Chrome, and More, 10978, 22 oz

Pretty amazing stuff.Perfect for my already ceramic coated car.Adds even more gloss if that's possible.Easy on easy off.I caught this product from a message board with one line stating get this. I did, nothing more to say. It works, smells good and last.

I’ve been polishing and waxing cars for 40 years. This is the best I’ve found!Pros:Goes on easy.No white residue.It works on multiple surfaces! Paint, of course, but also plastic, chrome, rubber, and more. This is a huge plus. Gives great UV coverage.Excellent gloss and depth.Lasts a long time.Cons:Not really a con, but you have to follow the directions. Unlike most waxes, you cannot let this dry on the surface. You’ll get haze, and won’t get the slickness. Do small sections, DON’T use too much, and buff it out with a clean towel before it dries. Also, the surface must be properly prepared- clay bar at a minimum, clay and polish if needed.It works fine with one coat, but a second coat 24 hours later does add noticeable gloss and depth. A bit of a hassle, BUT the second coat takes very little product and goes on and off very quickly. Can do the whole car in 20 minutes.This one is a keeper! My cars have never looked better.

UPDATE: I’m still in love with this product. Yesterday I washed a 18 year old Range Rover previously treated with the Griot’s hybrid ceramic wax and it was a breeze. The attached pictures show the depth and gloss that it provides. Also, I included a picture of the proper amount to apply for best results. It really is best to use sparingly as you can see. Also, I choose to use the spray setting on the bottle as opposed to the mister setting. This way stray product doesn’t end up where I don’t expect it and it makes for an easier application. Original review is below:I love this product. It brings the depth of a carnauba wax, and the longevity and durability of a ceramic coating, all very economically and is easy enough for anybody to use. A couple of notes that you should be aware of though:The better you prepare the car, the better your results will be. This means a thorough wash, clay bar, and polish as needed, followed by using a IPA or prep product before application. While none of that is absolutely necessary, your results will be better and the coating will last longer before needing another application.Regarding application, less is more with this product. A regular size hood should require no more than 4 or 5 sprays. You will regret it if you use more. Also, for best results you should do 2 coats, separated by a minimum of 12 hours in a dry environment to allow for proper curing. If preparation is done properly, the coating should last at least 6 months but a year is more common.Since it is best to use sparingly and because it lasts so long, it is incredibly economical, and the results look professional.This is one of my favorite car care products giving professional results and is very user friendly. It can even be used as a maintenance topper for fully ceramic coated vehicles. They got it right with this one..

Recently got a 2024 Tesla Model 3 and was looking for something to help keep it shiny and clean inbetween washes. I've used this stuff several times on the car to shine it up and it's awesome!Super easy to spray on and wipe off with a microfiber towel for a streak-free, haze-free shine. The sheen and smoothness after is next-level. This stuff is really good and keeping the car looking pristine in between major details or after you give it a quick wash.I purchased a few different products but found this one to be the best. I was really impressed with the water beading and running off the car during my last wash. Pictures are after a quick wash in the driveway and maybe 15 minutes worth of spraying this stuff on. Impressive and worth the money!

Very easy to apply, nice shine, and appears to beads water off of surfaces.

Update 11/12/2023: I purchased a new RAM 2500 in the dark Patriot Blue color and the paint had tons of contaminants from sitting on the lot and micro scratches where the dealer wiped down the truck. I cleaned and used a mild polish to prep the surface. I then applied two coats of ceramic wax 24 hours apart. Wow! Just wow!Less is more with this product. All you need is enough to see the product flash dry when you wipe down your vehicle. The results were amazing. Be sure to use plenty of fresh towels for spreading and buffing. Always apply to a cool surface. Occasionally, I like to use a ceramic detail spray as a top coat.---I use the Ceramic wax on my 2020 RAM 1500 which has black paint. I fully polish the truck and rinse any residue away prior to applying GG's Ceramic Wax. I get the best results with two coats. One coat, wait 24 hours, then add a second coat. To avoid steaking, this is a product you should not apply when the paint is hot, or under the sun. The cooler the better.On black paint you will get some streaking and it takes a little work to fully buff everything to perfection. Any streaks can be removed with some elbow grease and a FRESH microfiber towel. A light spray of the ceramic wax product or a detailing spray helps with this process.After the second coat, the paint is silky smooth and has a mirror shine. Periodically, I like to use a ceramic detail spray as a top coat which adds some extra protection and deepens the shine.As for longevity, the beading features of the GG 3 in 1 product lasts just shy of a year, but the the best beading performance and shine is during the first three months. After three months, I think the deep shine is starting to diminish, but the beading is still amazing. After six months you still get good beading, but not like a brand new application. At the one year mark the coating is totally worn out. All said, a little extra maintenance every three to six months is recommended.Despite some minor streaking issues, GG's Ceramic Wax is an exceptional product and I highly recommend it, especially for the price!