Dorman 926-855 Seat Cushion Assembly Compatible with Select Chevrolet/GMC Models

I watched a couple of YT videos by other companies selling seat and cushion replacements. I just wanted to get familiar with what I might run into, and the tools required. I noticed quite a few people complaining that the replacement seat bolt holes being unthreaded, and others claiming the holes did not line up. I did the job (including removal and replacement) solo in about an hour. It would help to have some help; I made do with a couple of ratchet straps and a piece of 2"x3"x4' that was kicking around in my van. Another reviewer mentioned the unthreaded holes being addressed by the fact that the bolts intended for the holes are self-tapping bolts, and they were. When you remove the factory bolts fastening the seat cushion, break out your impact driver, drive the bolts into the new seat cushion frame (in the unthreaded holes), remove and set aside the bolts until you need to bolt the new seat cushion in, easy peesy. The tools used were a 10mm ratcheting box wrench, a 3/8" drive ratchet, extension, 10mm deep socket, 13mm, 18mm socket, a Philips screwdriver for the recline lever (may also be a T30 Torx ) and an impact driver. Tips: do not tighten up any bolt in a sequence until all the bolts in that sequence have been started ie: seat back and seat to sliding frame. The star of the show is the ratcheting 10MM box wrench, if you don't have one, get one, or you will spend a long time with a regular open end, or box wrench going 1/4 turn at a time in a tight spot. I am very happy with the outcome. I found the seat comfortable, well made, very close to my 20-year-old upholstery color and feel, and I think my van looks at least 70K miles younger. You can do it.

Purchased this item to repair a customers seat. The item was directly inline with the original equipment. Once the seat was apart the replacement fit in perfectly. The color also matched the seat back perfectly. Great substitute for repair when a good used quality seat is not available.

WATCH THE 2 BROTHERS' INSTALL VIDEO ON YOUTUBE!! You do have to unbolt and pull the entire seat base out the vehicle (4 bolts). It's a 2 person job and your frame my need to be pushed down on and twisted around a bit but all the bolt holes will align up and bolt in. It takes a bit of patients and elbow grease but it will go on perfectly fit.

Exactly what was advertised a little time consuming but well worth it

Looks great, easy to install, probably comfortable. They just forgot to thread the mounting holes.

Seat Received and Installed ! Very tight fit , but looks great. I’ve given a 4 star based upon the foam a bit high . Thanks

Fits great, no problems

Item what shipped and never received first time. way after arrival date. Second one showed up two weeks later than supposed to. but part fit, works good