Western Digital 4TB WD Red Plus NAS Internal Hard Drive HDD - 5400 RPM, SATA 6 Gb/s, CMR, 128 MB Cache, 3.5" -WD40EFZX

The WD 1TB WDBMMA0010HNC-NRSN drive kit fully met my expectations. I bought this drive to make a RAID1 pair. The drive performed well in my home-built FreeNAS server and provided better network storage performance than expected without any glitches or issues. When compared with 750GB WD Black drives in the same server the RED drives appeared to give slightly better perforance in NAS. Maybe the NAS specific firmware isn't just marketing. For more, read on... I wanted to build a NAS server for windows sharing, iSCSI, and nfs sharing. I had an old 1U "pizza box" server with a core 2 dual CPU and 4GB of ram available plus SATA II (300MBPS) channels. I got one of the WDBMMA0010HNC-NRSN WD-red drives through the vine programs and I bought a second through Amazon to build this NAS server. This drive is the retail package. It came in a nice box with 4 screws for mounting and a little bit of very fine printed material which I didn't bother to read. If a "bare drive" is fine and you don't care about packaging you might want to consider another listing for the 1TB WD Red drives which may be at a lower price for essentially the same thing. The software I used to drive the NAS is the excellent (especially at the price) FreeNAS server. It installs on a USB stick of at least 2GB. My old box had several USB 2.1 ports, so no problem. I configured the drives in a RAID 1 mirrored array using software RAID (instead of the FRAID (fake raid) built into the motherboard chip set. I first built the server with the WD Red drives first and ran some casual tests with windows shares and iSCSI. Using windows network or iSCSI I could saturate my Gigabit Ethernet with no problem. Performance was not an issue. They ran great and I had no complaints over several days of use. This isn't too surprising as many NAS boxes use little Intel Atom processors. Next I did a comparison by replacing the WD Red drives with WD Black 750GB drives I had on the shelf. I didn't see much difference but I felt that copies of lots of small/medium files completed more quickly with the Red drives. Maybe the caching algorithm of drive was just better tuned for NAS on the Red drives. A plus is the Time Limited Error Recovery (TLER) which is an important part of drives that are designed for RAID deployment. And having a drive that is designed to be on 24X7 is great. I've switched back to the WD Red drives in my home-built NAS and I'll update this review as I live with the drives and report if there are any problems or notable excellence that stands out. Hope this bit of experience helps someone. Update: Dec 3, 2013 I have recently gotten a Buffalo LinkStation 420 2TB 2-DriveNAS Personal Cloud Storage and Media Server In comparing my home built FreeNAS system (on old core duo hardware) with two of these drives to the LinkStation with 2 Toshiba drives was interesting. The FreeNAS system with the WD NAS drives (both systems with RAID1) ran about 50% faster than the LinkStation. You can check my review on the LinkStation for more information about my comparison. The LinkStation might be a better option to get diskless for a very low price use these drives inside it. The small footprint and low power make it an attractive option. Bottom-line it seems there may be something to the NAS specific firmware of these drives.

Pros: Time Limited Error Recovery (TLER) for NAS/RAID usage. Price premium much lower/insignificant compared to what it used to be for NAS/RAID drives. Low power/Low temp. Cons: Warranty only 3 years (What happened to the 5-year warranties, WD?) I've seen failures in many drives from Seagate, WD, and other vendors in the past. Hard drives fail. Even SSDs fail sometimes. That's why RAID configurations are so popular. All versions of RAID configuration (except for RAID 0) introduce redundancy, such that if any single drive fails, no data need be lost. Full redundancy can be regained by rebuilding the array with a replacement drive, theoretically keeping your data safe from single single points of hardware failure indefinitely. These NAS drives go one step further in that their behavior is optimized for a RAID environment. In particular, Time Limited Error Recovery (TLER) allows them to rely on the redundancy built into the RAID controller and the overall array to handle the sorts of errors which will inevitably pop up at some point. This reduces risks to data that can be caused by the behaviors of regular desktop disks, whose designers optimized them for environments where there is no RAID array backup. I have been running RAID arrays regularly with desktop drives for over 6 years now, and it's been a pretty frequent occurrence where a drive would suddenly have to be rebuilt for no apparent reason. In all likelihood, the reason was just a few bad sectors on the disk, which happens all the time. The total failure rate of drives in a RAID has been a little above normal, but the total rebuild rate without total failure has been very high. Read up on TLER, and you'll understand why that is expected behavior with desktop drives but not with NAS drives. The total drive rebuild process is actually fairly risky to the integrity of the data, considering that in most configurations there is no redundancy while this is happening. Therefore, making sure that a total rebuild doesn't happen unless necessary is a pretty good idea if you want to protect your data. That's why I am upgrading my RAID arrays with these drives. In response to the reviewer who complained that the WDIDLE3 issue affects these drives: I just bought 4 of these drives in the 1TB version from Amazon. (July 2015) All are model WD10EFRX. I ran WDIDLE3 /R to read the current value of the timer on all four of them before connecting them to my RAID controller. All four came set to 300 seconds (5 minutes.) This is a very reasonable value for most NAS/RAID usage, and certainly not as problematic as the 8 second timer that caused the well-known problems on some previous WD drives. If you're using these to mount an OS drive or a drive in Windows, that 5 minute timer will probably never be invoked. If you're using these on a 24/7 NAS or for non-OS storage in Linux like I do, that timer could lead to considerable power savings and reduced average temperatures, the latter of which will probably extend the life of the drive, not shorten it. The only way I could see the 300 second idle timer being a problem is if you're running a script that causes disk access every 6 minutes (or 10 or 15.) i.e. if there's something that regularly forces spin-up right after the disk idle has gone into effect. In that case, WDIDLE3 is included on the ultimate boot CD version 5.3.5 and can be used to disable the timer. An idle timeout of 300 seconds is a pretty good feature in most cases, though. P.S. I have four more 3TB versions of this drive in transit for my NAS (the 1TBs were for my linux desktop) I will check the default WDIDLE3 values on them as well and post here if they prove to be different.

It has only been used for a month in my NAS, but it works perfectly and the price was the best part.

Awesome 12TB. Exactly as expected.

I bought one of these drives in like-new condition from Amazon Warehouse to replace a dead Seagate Pipeline drive in a satellite receiver/DVR. It's only been running for a couple of weeks but I just had to reiterate what most reviews here are stating - it is amazingly quiet and very fast! The original drive made quite a racket because the DVR is always recording but this one is barely noticeable. My only complaint is that the manufacturing date is in July of 2021 - almost 2 years ago - which cuts the warranty significantly. I looked up the warranty status on WD's support website and found that it expires in December of 2024 - only 18 months instead of 3 years as advertised. I don't know what manufacturing date the new ones are shipping with but if the warranty is important to you I would look for the date before opening the anti-static bag it comes in so you can return it unopened if necessary. You can also check the warranty status using the serial number that is printed on the box.

So far has been a great drive. I wish I would’ve bought two when I bought it.

Operates well. Used it with my Nas and I’m very pleased. Very quite

Llegó bien embalado y funciona perfectamente, apenas hace ruido. Instalado en un pc de escritorio como disco de almacenamiento masivo.

NASで利用していますが、静音で安定していて満足です！

Schijf gekocht voor de nieuwe NAS. Snel geleverd maar ik schrok van de verpakking: een kartonnen enveloppe met een enkele laag bubbel theater plastic om de schijf die verder enkel in een anti statische zak zat. Het pakket komt door de brievenbus en valt een meter lager op de vloer. Uitgebreid getest en gelukkig geen defecten gevonden. Dit is wel iets waar Amazon beter over moet nadenken.

This one has just replaced an old one which has been used constantly in my home media server since 2017. Nothing more than a confirmation of longevity of the old unit. I would expect the same from this one.

Je possède 14 wd red, de 3TB à 6TB. Depuis 2015, zéro panne. C'est un sans faute. Mais c'est un succès relatif peut-être pour vous, en fonction de votre utilisation par ex dans un NAS qui tourne 24/24. Mon utilisation est la suivante, je stock mes films dans les wd red pour les visionner sur ma Dune Solo 4K, donc ils n'ont pas un nombre d'heures de vol élevé.