onlyfireStainless Steel Square Fire Pit Burner with Pan, 36 Inch DIY Outdoor Propane Firepit Fireplace for Backyard

The media could not be loaded. Really nice stainless steel fire pit. I bought the 36” pan. Nice flame and overall good build quality for the price. My one complaint is it only has a 1/2” inlet when it claims to be rated for 400 thousand plus btu but only at 0.5 psi. It’s pretty hard to find the fittings needed if using a turn valve to get over 300 thousand btu. Regardless it’s still really nice and very warm.

This small unit is perfect for my needs. Many are larger but my design needed something small such as this and it worked perfectly. It is sturdy, has a good flange, and the burner size matches the pan. My only wish is that it had more orifices to distribute the flame better.

The media could not be loaded. Im so impressed by this burner and pan. The corners came a little bent, and the material isnt the thickest, but it is sturdy and beautiful. The pan insert is a true 36" square with a 1.5" lip.The quality is fantastic and is a fraction of the price of competitors. I bought the bundle with the stanbroil valve and ignition and have less than $500 in the fire pan, and less than $300 in block.If you use flex, you will get a whistle. The whistle free line they suggest works, but is too short. So i built most of mine out of galvanized. The 36" burner kit puts out a great amount of heat and takes a lot of lava rock/fireglass. I used a small base of black fire rock and will add glass later.I cant say enough good things about this kit. The video and pics are of half way turned up.

Works exactly as you'd expect and was simple to install. I bought 18 pounds of fire rock, and had about 3 pounds left over, so 15 pounds should do it. Also, the recommended 1/2" propane adapter fitting does connect to the fitting on this fire pit, but it will NOT fit the hose they recommend. You will need a 3/8" male flare to 1/2" female "reducing" fitting to get the hose to connect to the propane fitting. I wish Amazon had told me this, I needed to run to the hardware store for that fitting. I would also recommend an ignitor. This works fine with a lighter, but an ignitor would be handy and they are cheap.

This seemed to be the perfect solution to our existing fire pit, but it did not light evenly or consistently, came with no manual and we could not get a helpful response from the seller. It is disappointing how much time and effort this consumed to be back to square one.

Very high quality I have purchased two fire pit burners from this company round 18” and this square 24” their very nice, I don’t think they could be any better. I used one in a brick paver application and a deck pit.

The table we purchased for our deck has a square lift out section in the middle that is perfect for this burner. It is a little smaller than the hole so it was necessary to add stainless steel strips around the edge to hold up the burner. Add fire glass and glass windscreen and it is very nice to sit with a glass of wine and toast marshmallows very carefully. (gas is not as marshmallow friendly as those glowing campfire coals.)Unfortunately the control on the propane hose to the tank is VERY touchy (not part of the fire pit package although it was suggested on Amazon when purchasing the fire pit) The control will need to be replaced / upgraded for safety.

This is 24"x24" but.....it has about a 1/4" 90degree flange turned down all the way around the outside, so it is NOT flat. If you sit it between your blocks, it causes your blocks to have a gap. This did not work for my installation, so I returned. Honestly, cant think of an install that it would work for. It is good quality, I just had to order the one that is a 2" pan with a flat 1" flange all the way around so that it will slip under my blocks.