2.5" Front Leveling Lift Kit That fits F150 2.5"

These spacers are solid metal no welds with these. They look good (not like it really matters after install). FYI these are not a walk in the park to install but that is not the kits fault. You will need to either knock out the strut studs or loosen the lower control arm If you can get the studs out you should not have to loosen the control arm. If you can not get the studs out (like in my case) will have to loosen the lower control arm. I found the best way was to get the control arm loose, insert the strut studs into the control arm, Push down on the arm with your foot and place the top of the strut into the mount.I would also recommend taking off the brakes, knuckles, and rotors. This lightens the stuff you will need to move aroundYOU WILL NEED ALIGNMENT! Any level kit of this size with need one. The lifting the front shortens the reach of the tire rods making your tires point in. Also if you loosen the control arms your camber will more than likely be off as well.You should not have to replace any other parts but i would highly recommend at some point to get aftermarket upper controls arms to fix the angle of thoses. They can smack the spring every now and then.This kit installed on my 2018 F150 FX4 put the front end from 2.5 lower than the back to .5 inch higher than the backThis took about 3 hours in my garage with ratchets and standard tools1 or 2 jacksjack stands27mm wrench or socket with breaker bar21mm deep socket21mm socket18 mm deep socket13 mm socket10mm sockat8 mm socketflathead screwdriver

These lift “pucks” are very well made, powder coated and super easy to install. I put them in at the same times as replacing the front struts in my 2004 F150 (new model) and they leveled the truck nicely, though are maybe a 1/2 “ or so taller than I might like. Of course doing bot the lift and the sdtruts at the same times it is not easy to determine which is causing that condition. I suspect the struts will settle down over time and lose some of their lift and evertytrhing will by perfect.Would buy again. Highly Recommended.

A cheap alternative to replacing the front struts and coil assembly. Took about 3 hours on my day off to replace. Recommend borrowing an on car spring compressor, as this will aid greatly in reinstalling the strut, which will be couple inches longer and will take some finesse if you don’t want to drop the lower control arm down. Also recommend driving out the studs on the bottom of strut. Once you’re done it looks great though! Best 60 bucks I could’ve spent on this truck.

What I like most is the level kit gave me the desired level I wanted. I love the fact that my truck doesn't have the constant nose dive look.I dislike the fact that the dealership could not get to 100% on the alignment but managed 98%. For $600 they said they could get a 100%. This tells me that this leveling kit fits but the alignment will not be 100% without purchasing a Caster Cambar kit.Overall it's a really good buy.

Fácil de instalar

Leveled my 2018 F150 perfectly, needed 2.5" lift in front and that is exactly what got. I was a little nervous after the install the front of my truck was still 3/4" low, but after the alignment was done everything was perfect. I contacted MotoFab customer service for help when I had questions on the lift height and they were very helpful to get me the details I requested. I found the easiest install is to unbolt the lower control arm from the frame.

This product is awesome I ordered a 2.5” kit for my 2019 f150 4x4 it came in the next day. Got it put on and it leveled it out perfectly. Truck is sitting at 24” from center of wheel to the wheel well on both front and back. It didn’t change the factory ride at all for those that ask and everything else on the front end fit back and works like it should. Took 2 hours to get installed at my local shop. I did have to get an alignment though because of the change in the front end suspension. It cost me $205 for the shop to do it and $60 for the kit on amazon, just giving an idea of cost, I know prices are different everywhere.

Great product. Great quality. Only reason for not 5 stars is that it lifted the front almost 3” total. Now front sits half inch higher. Wish they had 1 inch blocks to go with it for rear