Invision TV Wall Bracket Mount for 24-60 Inch Screens, VESA 100x100mm up to 400x400mm, Tilts Swivels & Extends for Flat & Curved TVs, Includes Spirit Level, Weight Capacity 36.2kg (HDTV-E)

Excellent product. Very sturdy (when you pick up the package it really has some weight in it), well designed & neat-looking piece of kit which is fantastic value for money. Attaching it to the TV: This was purchased for an old Sony Bravia TV with odd (200x150mm) VESA dimensions. I clarified with Invision CS (who were very well-informed & responsive) before puchasing that it was compatible & simply used the back-plate without the additional 'wings' supplied; cinch to fit & lines up perfectly. I wanted to use the longest spacers provided since, due to the - outmoded - TV design, the backplate covers all the connectors, so purchased some longer (50mm) M5 screws to allow sufficient clearance. The 25mm screws supplied would have been fine were it not for this. There's a very good selection of other options too so you should find what you need in the pack. Attaching it to the wall: My TV weighs about 17-18kg - for a 32" it's a bit of a clunker due to its age & I bought this for my kids' (6yo) playroom so I deliberately over-specced the bracket to cope with the potential 'abuse'. Until I started drilling I hadn't realised that the walls were thermalite (breeze-block), i.e., a bit like the solid sponge-type stuff that's used for flower-arranging... I exaggerate slightly! I therefore opted to trade-up on the fixings & swapped the 80mm long coach screws provided for 100mm & used 2 x rawlpugs in each hole - the ones provided at the back & new ones purchased at the front to give sufficient purchase. As with those provided, the screw heads are hex so I was able to tighten these with a socket - I doubt you'd manage to do this with a spanner let alone a screwdriver so worth considering this before you embark. The result: a very solid, secure connection, tested out (as suggested elsewhere) by each kid swinging on the bracket - at maximum extension too - w/o any mishaps. (I've obviously banned them from doing this again now there's a TV attached to it!) TV is dead easy to attach once you've fitted the bracket to the wall but it is a 2-person job - 1 to guide, the other to lift. Instruction booklet - though typeface could be a little bigger - is easy to follow & has good graphics too. All-in-all, an excellent product. Seems a little counter-intuitive that you'd entrust your £1,500-worth of Sony/Samsung/LG to something that costs £25 but I really think you'd struggle to find better at any price. * I obviously didn't test this but would be confident the wall & TV would 'fail' first!

Really good all round will buy this again as another few needed Pros Brilliant bracket, and solid Good idea with the built in cable tidy. Use on all size tv vesa mounts Good hinges which, holds the position really well Good tilt angle hold which, hold the position well Not too bad to fit at all would have been better with supply of anchors rather than, the wall plugs but was fine. Cons For any novice diyer, make sure your holes are bang on as, no movement is given in the holes compared to others. Instructions are not great for attaching the extension arms but not hard to figure it out. Cheap spirit level supplied - we used our own quality one as, the plastic one supplied wasnt cut straight so giving inaccurate level The pros really do out weigh the cons as being picky but only as having the right equipment and knowledge

This is the second one I’ve purchased this is such a great bracket and cables can be kept tidy easy to fit and comes with everything you need,great price & customer support.

This is a very sturdy, well built bracket. I bought it hang my 40" Samsung TV on the kitchen wall. The kit comes with a selection of VESA/Machine screws to attach your TV to the hanging plate (more on that later) and 4 rawplugs and 80mm coach bolts for bolting the bracket to the wall. There are 3 holes at the top of the bracket, 3 at the bottom and one in the centre. The instructions recommend to use the 4 corner holes if attaching to a solid wall or the 3 vertically centrered holes for a plasterboard wall. My wall is a plasterboard wall and luckily there was a stud timber where I wanted the TV positioning so the bolts are securely attached. Note that the coach bolts supplied are 8cm long so make sure if you are putting into a partition wall that it is deeper than this otherwise the bolt will come out the other side! If your TV is a 100 or 200 VESA set then you do not need to attach the separate extension arms, the backplate has the holes already there. The arms are only required if you have a TV requiring VESA 300 or 400 spacing. I did not use the supplied spirit level as it is a very cheap plasic one which I would not trust to be totally accurate. I used my own level for installation. Also I would recommend a socket set for screwing the bolts and the various nuts on the bracket as the spanner supplied would be too much like hard work (and hurt your hands) and it looks as though it would not be up to the job anyway. A socket set makes installation so much easier. If your bracket is a fraction out of level, when you add a TV to the bracket it is even more noticeable. A nice feature of the bracket is that you can adjust the rotation of the TV clockwise/anti-clockwise up to 8 degrees so even if you are slightly out, add your TV, put your level on the TV edge and then simply rotate the TV. Bingo! The plastic covers around the arms are very handy for routing the cable(s) through to keep them all tucked nicely inside. So, why the 4 stars? One point - I have a 40" 2017 Samsung UHD TV (not curved). According to the TV instructions you need to use on their 40-49" TVs 45mm M8 screws to attach the bracket backplate to (when using the Samsung supplied spacers). Invision supply a whole host of machine screws for attaching your TV but the longest M8 screw supplied is 40mm which is not long enough to attach the plate to the TV. I had to buy these separately. Invision do state that if you contact them they will supply the required fittings but I could not wait around emailing and waiting for them to post me 4 bolts. As Samsung are one of the main TV brands I would have thought that Invision should have supplied M8 45mm bolts as standard. All in all a great bracket and really pleased with the purchase despite having to source my own TV machine screws. Recommended.

Very good product that is flexible for the different support layouts. Movement in all directions is simple and easy and the included spirit level makes it easy to get the television level. Only minor hiccup is that the power cable and aerial cable are too short to be routed neatly, but those should be easy to overcome. Cannot fault this product and would recommend to all.

Great bit of kit easy to install and great movement so you can watch TV easily

Ne ho acquistati 3 . Solidi e ottimi. Vanno bene fino a tv da 60”. Seguire le istruzioni per un ottima installazione.

Easy to assemble. Strong & secure. Arm comes out far & the swivel works really well

Die Wandhalterung hält einen 55“ TV (Samsung Neo QLED) in unserem Wohnzimmer. Sie funktioniert einwandfrei frei, das Neigen, Herausziehen und wieder in die Ursprungsstellung zurückbringen ist reibungslos (on the fly) möglich. Sie ist jetzt seit 3 Monaten im Einsatz. Qualität/Haltbarkeit Hochwertig durch das massive Gewicht fühlt sich die Halterung hochwertig an. Die Verpackung lässt schon auf eine hochwertige Halterung schließen. Preis-leistungsverhältnis Für einen durchschnittlichen Preis gibt es hier eine überdurchschnittliche Qualität. Darüber hinaus gibt’s im Lieferumfang eine einfach Anleitung (Ü-Ei-Prinzip), eine kleine Wasserwaage sowie Werkzeug zum Anbringen der Wandhalterung. (Natürlich keine Bohrmaschine, diese sollte vorhanden sein). Die Dübel hingegen sind ebenfalls im Lieferumfang enthalten. Wir haben hier auf unsere eigenen Dübel gesetzt (Fischer). Montage Nachdem wir die Abmessungen an der Wand vorgenommen haben, um die optimale Höhe sowie Ausrichtung zu bestimmen. Ging‘s los mit der Bohrung der Löcher inkl. Dübel. Danach ließ sich die Halterung anbringen. Die Herausforderung war als die Halterung bereits montiert war, die Nivellierung des TV sowie des Neigewinkel. Es erforderte etwas Geduld und Fingerspitzengefühl. Einmal alles eingestellt und angebracht hält die Halterung alles Stabiö, so wie es sein soll. Fazit Einfach Montage: Ja, etwas Geduld und Fingerspitzengefühl benötigt Qualität: Top Preis-Leistung: Top

Çok sağlam, kesinlikle tavsiye ederim. Matkabım olmadığı için montajını yapamadım, ustaya taktırdım.

Produit conforme et robuste. Facile à installer.