CIARRA 60cm Visor Cooker Hood Undercabinet Hoods Stainless Steel Wall Mounted Kitchen Extractor Fan Model CBCS6903

Very good quality and quick delivery

It’s exactly what I need

I fitted this on my own. I am in my 60's. Didn't find edge's to be sharp as mentioned in other reviews. The metal was not thin. I drilled a few extra holes as my cabinet was a few mm shorter than end screw holes. It's not quiet but I didn't find it overly noisy. Looks great. The light at front is not brightest in day light but works well at night when I only put a lamp on in kitchen. I purchased the extra filter to place over the metal filter doors.I have a large open plan kitchen dinner but needed to use the recycling of air due to position of my cooker. Keeps all the steam away from me when cooking.This item has a plug attached so no need to wire in.Im pleased with the item. Did still have food smell but as I am using recycling mode that's to be expected.1 star removed for brightness of light.

Clears steam from cooker no steam escapes

Pretty average cooker hood. does the job for a low price. no bells and whistles but is easy to install and so cant fault it really.

First of all you have to be realistic - this is not a state of the art top of the range hood. It's tinny, it's noisy, the filters are small and the drop down door is fairly flimsy. That said for anyone on a budget this is a great little buy. It can be fixed to the wall via the screws at the back, there are holes in the top which allow fixing to the underside of a bridging unit or sit it on panels attached to the units either side. It can be recirculated or vented. It has a front light, 3 fan settings and the drop down door can be removed but take care with the sharp edges. It also plugs straight into a wall socket but note that there is a kettle style connector halfway along the cable so you may have to drill holes into units. The slim design also gives it a good modern look. Bottom line is this will do the job at a fraction of the cost and do it quite well for the price.

This extractor cooker hood is very well built and extremely easy to install. I was surprised to find that it was equipped with a moulded plug attached to 4 feet of flex. This is a class 2 piece of hardware that doesn't require earthing. The fan is very powerful even though it uses a max of just over 83 watts and the light is led and although not fabulously bright lights up the cooker well enough.For the price this extractor is very good value.👍

Bought this as a replacement for a very old under unit extractor fan. Fitting was quite easy. For my installation this mean the unit being secured to the underside of the up and over cupboard with four self tapping screws. The important issue to note being that the 4 predrilled holes in the top surface of the unit are all less than 300mm from the wall, i.e. the holes mean you can mount the unit by securing it to the underside of a standard 300mm wall unit.The unit can be externally ducted or switched to recycled. In recycled mode, the efficiency is impaired, but this is to be expected and is like to be true of any extractor fan.Power is fed into the unit on the top back edge of the unit, this almost perfectly lined up with the location for the power cable of the older extractor fan, so a small enlarging of the hole into the up and over cupboard was very easy to do.The unit comes with a rectangle of mesh material that acts as a grease filter. To this I added a sheet of a charcoal filter which is suppose to trap more odours. The advantage with this unit is that the filters are just sheet material rather than more expensive constructed units. The down side of these cheap filters is that it is probably not as effective at trapping stream and odours as more expensive solutions.The unit is made from stainless steel and the edges are sharp so be careful when fitting.Essential an inexpensive, easy to fit solution.