Mars Gaming MCB White, PC Gaming ATX XL Case, Custom Premium Edition, Modular Dual Chamber Structure

Look I am not saying this case is the best case out there. I'm not even saying it is particularly good to look at but at the time I bought it, it was the cheapest case I could find on Amazon. However don't let that put you off. I was after a budget build so this fitted the bill perfectly. It came with all you would expect in the way of screws and cables to connect to an ATX motherboard which is precisely what I did. I also added a small 80mm fan on the rear to plug into the chassis fan on the motherboard. The two LED fans on the front are decent and give good airflow. I had no issues with installation as everything fitted well. Only odd part was mounting the SSD's to the base of the case but not a real issue. also with a decent Perspex side you have to get your cabling tidy (which you can see I failed). I was using a 5600G processor with onboard graphics so didn't install a dedicated GPU. If I do it would have limitations to length as the case is small - there are some that would fit but I may have to change the case at that point. Also the tall cooler I chose didn't fit so a lower profile one will be needed - I went with the stock cooler in the end as I am not over clocking at this stage. overall a good starter case for the budget builder.

This case was much, much smaller than I was expecting. I intended to mount the Hard drive & ssd at the bottom of case but simply there wasn't enough room to mount a graphics card, talking of which I was planning to use an rx580 but it was too long so I've had to a zotac 1660 super mini. I was planning to have two fans installed I have removed the top one to make room for the hard drive & Ssd. The air flow is terrible, currently having to run it on its side as the non existent feet mean no air can entry from the bottom. The case looks nice but it made from the finest Chinese pressed tin, no cable management room in the side panel. Please buy something else.

Great case. Would recommend. Pros. Easy to build in lots of room. Look really clean. The size is perfect to fit in my TV cabinet. Duel champers of it make cable tidying alot easier. Honestly I wished more cases came in a cube style. Support 7 120mm in the main half of the case. Which is great if you want lots of air flow. 2 120mm fan in the side half with the PSU. Miner cons. The fans included aren't great. So I highly recommend replacing them with decent one. You can easily find a half decent set of 5 120mm fans off Amazon £15 to £20 which easily better that the included fans. Or go all out with some nocturna ones. I only have 3 nocturna fans in. 2 in the front as intake and 1 in the back for exhaust. And air flow seems good with low temperature. 1 big con I had with mine was the GPU mountings screw hole weren't aligned properly. Easy enough fix as I just made a hole with a drill. But not the thing I should have to do. Hopefully it was just an error with my case.

I've got this case to swap the case and upgrade an old pc for my son. The case is compact, bear that in mind if you plan on getting this case and have long and lots psu cables will be tough to have any clearance. M-atx motherboard fitted well. I wouldn't try to put a 4slot ram motherboard as will leave no room for front fans at all and would be a struggle. I have added another 120mm front fan and keeps it really cool overall. I still have enough room for a 3.5 inch hdd wich will be added later. 2.5 inch ssd fitted just well. Build quality isn't the best as cheap plastic is used and the metal bits are a bit flimsy but you can't complain at this price point which balances price to quality ratio. Side window is plastic so don't expect tempered glass. I would mention that the rooting at the back of the panel was ok as my psu used cpu, motherboard, gpu cables and has 4 molex connections and 4 sata connections. Used zip ties to keep them together and everything is nicely rooted. I chosed this case for it's compact form and overall it ticked all my points.

This is a very compact case, I’ve worked on bigger ITX cases than this! Photo shows it compared to an old Antec case as an example. You can use mATX boards but there’s very little room. Your graphics card choice though, that you need to be careful with. I went with a Costco 1660s that’s pretty small and low powered. Fits fine. But a 2070 I tried? No chance. The case itself is made of very thin metal, it’s super light and flexible. You push too hard it’s gonna bend. And these panel? It’s thin Perspex that will deform and crack easily if you are not careful. The front light bar looks quite nice and a button on the front gives a good selection of colour schemes. The 8cm fan is fixed rpm and fixed colour. Cable management is…. Not the best. There’s some space behind the board for flat cables but it’s limited. Bottom line is it’s a cheap case, really cheap. It looks ok but when you work on the case you know you are working on a cheap case. The finished product looks ok though. Three stars from me.

Kapot aangekomen ,jammer dat er geen afhaalservice was want met artrose is het lastig lopen...

Amazon a tendance a mélanger les commentaires de différents produits d'une même marque, c'est pour ça que je spécifie mon commentaire sur le Mars Gaming MC-X7 Blanc. Boitier pc trop cher pour ce que c'est , matériaux un peu cheap, obligé de démonter le ventilo arrière pour placer correctement une carte mère ATX ,emplacement pour ssd pas évident ! Mais tout fermé ,gain de place sur votre table /bureau et une "gueule " pas dégeu dans l'ensemble !

It's cheap and thin. Fans needs molex to work.

Very nice compact case. Enough room for additional (80mm) fans, ATX/SFX power supply. Sturdy enough to accommodate all the components.

istället för att ha glas har den plast. Chassit känns väldigt billigt gjort