HITBOX 200A AC/DC TIG Welder 6-in-1 with Pulse & Square Wave, HF Start Aluminum TIG, MMA/Stick Welding, 220V IGBT Inverter, Dual Cooling Fan, Digital Display, Foot Pedal Compatible (HBT250P)

For the price of this tig welder you really can't go wrong, it does AC and DC tig along with stick. I did not do any stick welding with it yet. Ran the machine on a few parts and it welded flawlessly. It comes with everything you need for tig welding except a regulator, tungsten and cylinder of argon, it does not come with a stick electrode holder. This welder uses the smaller 25mm dinse twist lock connectors, it has high frequency start with pulse, it is a point type HF start. The 17 series torch works well, it a euro stye and accepts all common 17 series parts for the head. The fans run all the time but not too loud, the inface is standard for most all tig machines so setting it up is easy. I don't know if they make a pedal for this welder but might be a good add on, either way the trigger on the torch with up and down slope works well. Its small and compact and would make a good bench or machine to load up to take on-site. It 230V single phase only, you cannot plug into a 115v wall socket, I would assume it would do fine on a generator with a 30amp 230v output. The max amps is 200 and welding 1/4 aluminum is about as thick as it will weld for smaller parts, the power does seem legit as I do have a video of a bung being welded in 1/4 6061. Fit and finish is excellent, I was really surprised how good the arc was, for doing turbo pipes, exhaust and small parts this should work great. AC tig for doing aluminum on a budget is the real benefit to this machine. ***Update, this little tig machine continues to put in the work, compared to some of my other much more expensive tig machines it is super handy to move around the shop for quick tack ups and repairs.

Brand new to TIG welding here, and I'm not any kind of pro welder at all. Self-taught (i.e, poorly-taught)/home-jobber. I have a MIG I picked up a couple of years ago that's served me well for home-tasks and 'hot-metal gluing' stuff together. My welds are not pretty, I have minimal skill, but I can stick stuff together and it holds. I'm not building race-car roll-cages, or other mission critical stuff. We're talking 'stitch up cracked lawnmower deck' or 'build an angle-iron wood-rack' .. the kind of low-risk stuff that's easy enough to just 'do' w/out much of a plan. I wanted a TIG box that could do AC for aluminum simply b/c I think it would be neat to be able to weld aluminum. My MIG welder does DC-TIG and does it well enough from the couple of tries I made with it when I first got the MIG box. But, for anything steel I needed to weld, the MIG-mode has been fine, and is easier IMHO. So, TIG... new ballgame. This welder has a high-freq start, which I can say works great (again, as appears to a novice). My MIG's DC-TIG is 'lift-arc', which requires more skill than I have. I have not stuck the electrode once with this AC/HF-start... it starts the arc a solid 10mm above the work. I have no idea if that's too high, prob is... again.. I'm a novice at this. I just was experimenting with how high/easy it would start an arc. Above about 10mm or so.. it was less reliable... maybe up to 13mm... don't quote me, but to me, it seems plenty high-enough. I've only spent a day at this point just laying down beads on scrap, and my 'beads' are not pretty.. but 'fusion beads', to me, seem fine. There's a lot to adjust for a newbie: rise, peak A, base A, +/- balance, fall, pre and post-flow... pulse mode settings. I worked through adjusting each setting a few different ways just to see if they had any effect and I can say, for me, I noticed differences in each setting. So, these settings are not 'vapor ware'... they all do something. I have the foot pedal as well, and I think this is the way to go. I mean, I know 'pro' TIG setups usually have a pedal, but since this box doesn't come with it, you have to buy it separately. Oddly enough, I got mine months ago to use for my MIG welder as an experiment (partial success)... but now that I have this TIG box, I reconfigured it to work with this new welder as originally intended. So, the pedal definitely makes it nicer to use, imho. The button on the included TIG torch appears to be on/off only. There's no obvious 'rocking' feature that would indicate it controls amperage. This is prob fine for learning, and maybe that makes it easier to learn with... I don't know. I have the pedal, so I'm only ever going to use the pedal. Again, the welder has settings for rise-amps and fall-amps which taper the amps at the start of the weld and at the finish.. this is ostensibly to help pre-heat and prevent cratering. Just repeating what the manual claims... I don't know enough to know this independently... but it sounds logical. The pulse mode is interesting. This will 'pulse' the arc from 1 to upwards of 300 times a second automatically. I won't claim to know why this feature exists, but I see it on a lot of 'better' machines, so I don't think it is a gimmick. I was playing around with it, and set it to 2, and it definitely only does a pulse every 1/2 a sec. I ramped it to 10, definitely way more pulses/sec. Higher than that and it really buzzes them out. I'm guessing the application for this must be on thin metals or something you're trying not to pour a lot of heat into. The gas hose... ugh.. this is by far the weak-point of the machine. It has a nipple for the output and not a B-size inert-gas connection. It comes with a stiff vinyl hose and two hose clamps. My argon bottle has B-size connx, so I had to find a barb-to-B adapter to connect up to one end of the hose. The problem -there- is that the hose is not 1/4" and doesn't work with 1/4" barbs. I imagine it is metric, so maybe its like 8mm... no idea... didn't measure. My hacky work-around for now is I wrapped my 1/4" adapter in a layer or two of good electrical tape. After hose-clamping this vinyl hose on... tests for gas-tightness passed the 'soapy-water' test. I'm going to find out what metric size hose-nipple I need and order one, then make a small pigtail-hose that has a female B-size coupler on one end, and hose-clamp the pigtail to the machine's nipple. Then I can use my regular gas-hose and not this goofy vinyl hose. I may later figure out if I can swap out the gas nipple with a B-size connecter directly to the machine and eliminate this pigtail hack. I don't want to open up the machine yet b/c it is still under whatever warranty it comes with, in addition to the Amazon 30day/whatever return-period. If the pigtail works well enough, that's fine for now. The stinger for stick-welding it comes with is, well... very cheap... as is the ground-clamp. I have a nicer ground clamp from my MIG that fits this TIG box (DINSE connectors). So, the stinger and ground clamp that came with the TIG box are prob never gonna be used. I don't stick-weld, but if I did, the stinger that came with my MIG box is better quality and I would just use that one. So!... don't buy this box b/c you think the components are going to be great. The TIG torch, I think, is fine in my zero-experience opinion. I can say it seems comfortable enough, has a bit of 'swivel' action at the end to help with hose-bind. It is not top-quality stuff, but of the 'accessories' that come in the box, it is the nicest (the others being the ground-clamp and ARC-stinger, which are very 'iffy' looking). The attraction here is the TIG box itself and the fact that it does AC, which at this price point/day-in-time makes it one of the most affordable such boxes if you want to do aluminum TIG. You also get a pulse mode function which may not have all of the options of high-end boxes, but having pulse-mode at all at this price, to me, seems like a bonus. I would've been plenty happy just getting AC mode (with some adjustment on AC balance even). The consumables you get are 'enough' to get going. You can 2 tungstens (red), one is 1/16 and the other looks to be maybe 1/8 or 3/16? You get the correct 'brass' to use either size in the TIG torch. I don't think there's any spares of these items... but again, this is enough to get up and running. You do get a few extra nozzles.. 6's and 8's... I don't recall any other sizes. These are what you'd expect... just ceramic gas nozzles. You can get packs of TIG consumables/nozzels/brass on Amazon, should probably do that. I do not know what 'brand' these consumables are patterned after... the brass is a collet-style, if that helps. I am sure it is going to be patterned after some name-brand, just don't know what that is off-hand myself. I have zero to say about durability as I've only had the box 2 days, and only used it a few hours at this point. If it blows up, I will definitely update this review. Conversely, if I have no trouble with it, I'll also update this review.. it may be some months before either happens.

THIS IS NOT I REPEAT NOT AN AC TIG MACHINE!!!!!!! I had thought I hit the jackpot when I was doing my research and everything on the Hitbox TIG200. Everything said that it was ac capable and could TIG weld aluminum. Seeing it was only $120 I jumped on it and was super excited. I have a MiG welder with a spool gun for aluminum but isn’t capable of ac TIG. But the welder performs and functions well. It’s not the welders fault that someone put false and/or misleading information about it. I’m going to keep it regardless.

As an avid hobbyist welder, I've been thoroughly impressed with the HITBOX TIG Welder AC/DC. This machine delivers on its promise of versatility and performance. First off, the AC/DC capability is a game-changer for me. Whether I'm working on aluminum sheets or delicate joints, the ability to switch between AC for aluminum and DC for other metals ensures I get clean, precise welds every time. The pulse function further enhances control, allowing me to manage heat input effectively, which is crucial for welding thin materials without warping. Setting up the machine was straightforward, thanks to the intuitive controls. It supports a range of welding techniques, including TIG, Stick, and MMA, which makes it a versatile tool for different projects. The IGBT technology ensures stable arc performance, even when dealing with challenging welding conditions. In terms of build quality, the HITBOX welder feels solid and durable. The construction is robust, and the cooling system keeps everything running smoothly even during extended welding sessions. I particularly appreciate the compact design, which makes it portable enough to transport to move around my workshop without hassle. Overall, the HITBOX TIG Welder AC/DC with Pulse has exceeded my expectations. It's a reliable workhorse that offers exceptional value for its price point. Whether you're a seasoned welder or just starting out, this machine will definitely enhance your welding capabilities and make your projects more enjoyable and professional-looking.

Would rate 0 stars if I could. Worked for maybe a day or two. Probably a total of 30 minutes of actual run time. It really doesn’t want to start an arc in both ac tig and dc tig. The gas solenoid does not work and won’t allow the cfh to go over 10 which is obviously bad. When it does start and arc it sputters around and is very bad. I even bought a different and better tig torch and pedal (not included) and that didn’t help either. I will be returning this welder. I do NOT recommend anyone else buying. Please save your money for something a little better.

I’ve been welding for years, but I recently needed a versatile, lightweight machine for a home project, and the HITBOX TIG Welder has exceeded my expectations. First off, the non-contact arc initiation system is a game-changer. Starting the weld is so smooth, and I’ve noticed significantly less wear on my tungsten rods compared to my old setup. The welds are incredibly clean, with no spatter, which saves me so much time on post-weld cleanup. I used this machine for a stainless-steel railing project for my porch. I was working with thinner material and worried about overheating or messy welds, but this welder handled it beautifully. The 200 amps of power gave me precise control for TIG welding, and switching to the stick welding mode was perfect for the thicker brackets I had to attach. The Hot Start and Anti-Stick functions are lifesavers, especially for someone like me who switches between materials a lot. Another feature I love is the post gas function. I set it to 5 seconds, which was enough to keep the welds shielded and cooled down the torch nicely. It made a noticeable difference in the quality of my final welds and prevented any damage to my accessories. Finally, the portability is fantastic. At just 12 pounds, I was able to carry it around the house and even out to the backyard without breaking a sweat. The built-in safety features like overcurrent and overheating protection gave me peace of mind while using it for long periods. Whether you’re a beginner or an experienced welder, this machine is an excellent investment. It’s easy to use, versatile, and produces professional results. Highly recommend it!

I've had this tig 250 for right at 6 months now and it's been a great machine. I've got about 100cf of argon through this, and running about 15cfh so that works out to roughly 5-6 hours of arc on time and it has run flawlessly the whole time. I run roughly 130amps on most of the stuff I do and I've never run into duty cycle issues, it's never even smelled hot. Few things I did do was removed the finger switch and just fitted a 3dprinted handle onto the torch, I also swapped in a pyrex cup and gas lense. Much needed upgrades. I added a pedal to the machine, but not the hitbox one, I used a standard miller style and just figured out rewiring the contacts. Only thing is this welder uses a remote amperage knob on the stock pedal to control the max current, so my pedal has control over the full 200amps all the time, no ability to limit the peak. Why they decided to control the current with this weird double voltage divider within the pedal is beyond me, every other machine has you set the max current on the machine. That's about the only downside I've found with this machine. I've just learned to regulate it fine. So the pedal setup and also the length of the ground clamp lead are about my only gripes with this machine.

So the machine itself functions really well for the price. I mostly use it for weld and clean cap welds on rifle muzzle device devices while doing compliance work. Also, I had pretty good success with it to welding small pieces of stainless and aluminum for work and various projects. The downside to this welder is the torch itself. It has to be the absolute worst quality torch I’ve ever used in my life. If this is something you plan on using for any serious form of welding, I would suggest you consider buying a replacement torch from the very beginning. Also very disappointed in the fact that it doesn’t come with a pedal control. It seems like such a small cheap part that could be added in for the bundle, and it doesn’t make sense that it doesn’t come with one.I’ve