Assembled Quick Click Dust Separator with 5 Gallon Locking Collection Bin and Power Tool Adapter Set with 16 Ft. Hose

Wish I would have got one of these sooner! Made sanding drywall with a 9” power sander faster, cleaner! Was able to sand so much more area of drywall due to not clogging filter in vacuum. Hose is very flexible and plenty of attachments to hook to other parts for fast change from stander to other tools

This works as advertised! I have used Centek products in marine exhaust applications so I expected good quality. I got good quality and good value with this. The only issue I have is my Ridgid shopvac has a 1.75" hose and there are no adalters for this hose to the vacuum inlet port included. A little duct tape and it seals up tight! I ran about 80' of cuts through BC pine plywood and only found about a teaspoon of dust in the vacuum. Prior to this I was opening and cleaning the filter every 15-18' feet of cut to get the vacuum back up to beffecctively remove dust from my table saw.

Purchased this package to go with my Shop Vac Brand wet-dry vacuum. I thought it would save me from buying more bags that just fill up too quickly when using the table saw. I liked that it came with a 16' hose and all the quick attach connections.1. Worked great. I took out the bag from the shop-vac and had almost nothing in the vac's filter or container after making 30+ cuts on the miter saw. Same thing when using with a sander. Most of the dust was in the cyclone's barrel. The filter on the shop-vac has next to nothing in it.2. The suction was not diminished when putting this in-line with the vac.2. The barrel was the added feature that put this in the buy category. I had watched videos on several other brands and was put-off on a similar setup (cyclone on a 5-gallon bucket) from the HF store watching how the plastic looked cheap and like it was going to break-off. The Cen-tec system was rigid while I worked and when moving it around.3. I feel bad removing one star because the barrel is not on wheels. It makes it difficult to re-set the system when I have move it around. The more option with the Cen-Tec metal barrel would be probably be great, but was out of my price range.4. Take note that it does generate static electricity and will gave me a little shock when using it with my sander. Grounding wire helps with that.

Works exactly as described. Perfect my small work shop. Easy to set up and will save the life of my shop vac and save money on filters.

Works great. Would recommend

Came with enough connectors/adapters that I can leave one on my Milwaukee track saw, one on my Milwaukee miter saw, one on my Ryobi sander, and one on my Milwaukee table saw! (But had to print an adapter)I was initially disappointed by the suction because I didn't really torque the lid down and didn't have a good seal. There is some suction lost compared to direct connection. But without a dust separator the vacuum filter can clog fast so I think this product or a competitors is a must. And this comes with a long hose, a lot of adapters and a lid that doesn't give me flashbacks to battling pickle buckets at the restaurant. The screw lid is miles better than an annoying pry lid.I am 3D printing a custom 2-1/2" to 1-3/8" adapter to fit over one of the included adapters to use this with my table saw. And a custom adapter for my Milwaukee Packout wet/dry vac. The included adapter fits the vacuum. But I can get a better seal with a custom 3D printed TPU (flex/stretchable) part.Not a complaint just a fun side project. Again you can use a Milwaukee vacuum with the one of the included adapters out of the box. I can't feel any air leaking around it. But I also know I can get a more reliable seal with 30 minutes in autocad and have a finished adapter 3 hours later.There is no 2.5" adapter included. So you will to buy or print a 2.5" contractor table saw adapter if that's you're use case. Not a complaint, I couldn't find anyone that includes a 2.5" adapter- this kit has more adapters than any I could find. It's worth the "premium" price. Assuming it holds up, but everything feels well designed and constructed.

I honestly wish I hadn't gone this route and bought this. It works mostly fine, but the problem is despite the adapters included with the system, they fit almost NOTHING. Doesn't fit my table saw. Doesn't fit my track saw. Doesn't fit my sanders. Doesn't fit the planer or the jointer, or... oh wait, it does fit one orbital sander I have, cool. I though there would be available cen-tech adapters to attach to 'typical' (who am I kidding? There's no typical dust collection port size on tools) sizes, but it basically maxes out at 1.5" The shop-vac it is connected to with its 2.5 inch hose can actually connect to more of my crap. If cen-tec upped their game and expanded their adapter line to make this kit useful, I'd recommend them, but otherwise, I don't really see the point over anything else. Yes, you can find various other things and use them as adapters, but the whole point is in the quick-click system imo.

The cylinder separator worked very well with my older Sears shop vac by separating the debris so the micro dust bags will last longer. Interfaces were good with Bosch and DeWalt but Milwaukee was too loose for the female adapter. I added a 2" OD x .210 thick O-Ring to the outer diameter of the female adapter and it fit right in the groove that looks like it was designed for the purpose. The o ring provides much better tension. It kept up with hand planer, router table, sanders and grinder.