CHANGTIKEJI Silicone Mold Making Kit,64OZ Super Elastic Liquid Silicone for Mold Maker, Fast Cure Translucent Silicone Rubber for Casting Resins Mold,Silicone Mold,Candle Mold,Soap Mold,Food Mold

Easy to work with, ratio is 1:1 which makes mixing easy. Holds detail well and cures quickly. Perfect for making molds

I am satisfied with this silicone as it's high quality and performed like every other good silicone does. The hardness is as advertised and the silicone self-debubbles so there is no need for a vacuum chamber. If your model has undercuts you'll still want to bump out any potential bubbles after curing. I've used many products and this was what I expected. I can recommend this to beginners as well as it's quite easy to mix and pour. Just make sure you don't pour it on anything containing sulfur, water or tin silicone and it should be fine. The size and value for the money are average, no big bargain here but it's worth the money.

This is the stuff I reorder for making silicone molds of wargame miniatures. It has a higher cure time than some other products but I like the semitransparent color, makes cutting the mold open in an ideal way easier.

I made my first mold, and the quality of the mold is nice. The size of my mold was too big because I did not use the correct paper product, such as a paper cup or durable cardboard; and because I didn't use a paper product to create my mold, I ended up using too much and my mold didn't come out right. The ease of use of this product is simple, just monitor how much silicone you're using to make your mold and to avoid wasting the product. Also, make sure you wear gloves and a face mask when handling this product.

Before anyone says anything about how their silicone didn't cure, you must know this about specifically platinum cure silicone: It is very sensitive to something called cure Inhibition! This goes for all platinum cure silicone, not just this brand. You need to make sure your work area is clean and organized, and you have to be very mindful about everything that touches your silicone. Common examples of contaminants that cause cure inhabition are rubber gloves, the rubber in gaskets such as the ones in some bottle caps and the plungers in syringes, most resins like epoxy, 3D printer, and UV (if that's what you are making a mold from) and a lot of different types of primers and finishes. You have to be extremely mindful about everything that comes in contact with platinum cure silicone. I have discovered this through trial and error and a ton of research. It's worth it to do the research because this silicone is very good. It is very strong, and it doesn't tear easily. Products that work with this silicone: - Clear Guard Sculpt Nouveau Matte Lacquer. This is a layer of protection between your model and the silicone. Spray at least 2 layers and let them dry completely for a few hours between coats. (Platinum cure silicone will have inhibition if you don't let it dry all the way.) - Silicone Free Adhesive Guru Mold Release Spray. Your silicone will absorb any mold release that is silicone based, so make sure to get silicone free mold release. Spray one layer and again, let it dry completely (an hour to be safe) before you cast. This silicone works wonderfully as long as you do your research and purchase the right products. The best way to test if a material is compatible is to drip a little mixed silicone onto it and wait to see if it cures. Don't give up!

This is quality silicone for molds at a really good price. I have tried a number of brands but find this one to be one of the better materials to use at much lower price. I would recommend it

I used Smooth-On but ran out then I tried this brand because it was less cost. The reviews were positive so I gave it a go. I can confirm that the bubbles self-disappear after an hour which was pretty amazing. I let it cure for 4 hours and in fact it set within that time frame. What I like is that the compound has little/no odor, and it cures semi-transparent which is nice because I can see the master pattern inside as I'm pouring. De-molding from the master was simple; it didn't get stuck at all. The best thing was that it captured a lot more details than Smooth-On silicone. I will definitely buy again. (btw, after mixing part A and part B, allow it to sit in the mixing cup for 30 minutes prior to pouring so that the bubbles can evacuate in the cup instead of the mold. You'll get better results)

Nice and cheap, durable when cured. DOES NOT cure around PLA 3d prints unfortunately, which is weird because most platinum silicones do. Will only be using this for special projects now.

لم يجف سريعا مع ان نسبة الخلط كانت دقيقة للغاية