msi MAG Forge 321R Airflow - Premium Mid-Tower Gaming PC Case - Tempered Glass Side Panel - ARGB 120mm Fans - Liquid Cooling Support up to 360mm Radiator - Vented Front Panel

This case is fantastic quality. The fans are quite silent, even on high. Airflow is excellent. Cord management is very good with well thought out placement of channels to place cords through. There were plenty of extra screws. The price is quite great for such a quality case. My only gripes are that the PSU shroud makes installing cables for a modular PSU quite cramped. A magnetic filter could be used for the front, like is included for the top, as the holes do allow quite a bit of dust in. And that the screws aren't great quality, and do easily strip. One of them stripped while installing the motherboard and could end up being quite the pain in the future.

Paired this with a MSI MAG 870X motherboard and MSI MAG E240 AIO CPU cooler. The case says it can mount a 360mm AIO cooler on the top where I mounted mine, but I don’t know if that’s true since the CPU power cables that attach to the motherboard were kind of blocking the liquid cooler from sliding all of the way to the back of the case. The ARGB control system on the case made connecting all of the fans a breeze, just remember you’ve got to hold down the LED button on the top of the case for 3 seconds to get them to program with MSI Mystic Light controls. Coming with four preinstalled fans made this a great value and the case gets plenty of air pulled into it. Somehow managed to become infested with xenomorphs, but it’s not enough to knock off a star. They mostly come at night…mostly…

Awesome case with good airflow. Easy build with this one. Has good cable management. I did not use any SATA drives in my build but it does have mounting options for SATA SSD and HDs if you need it. Keeps them hidden away for a clean build.

Let me start off by saying the case is a fantastic case, it’s well designed for modifications and allows for a wide variety of different parts. it’s got a sturdy weight too it and it feels of very high quality. Now on to the bad and these are more preferences than anything. The wiring to the fans is awful, you the moment I took the back panel off I was greeted with a rats nest of wires all connecting to the hub that control the fans and there is 2 ports of which you have to give power to for the fans to function, one goes to the mother board and the other goes to a SATA which has lead to a even uglier mess of wires although the fans are of very good build quality the wiring needs dramatic improvement. My only other complaint is the case is very tight if you are installed a ATX board, it’s still doable but expect very little space after the installation of all your components.

Honestly a great price for a case that comes with a lot of nice features. The 4 argb fans and the fan hub included are very nice for the price point of the case. Very pleasant to build in with minimal trouble. The only things I can complain about with this case is that the PCI slot covers are single use, however they do provide two screw-in covers in the case you pop the wrong one out or change slots. The other thing that gave me trouble was the motherboard stand offs. I had to install 3 to fit my full ATX motherboard, but for some reason the standoffs kept threading in sideways, after a few tries they finally went in correctly and let me finish my build. Other than those small complaints, this case is definitely worth the price and I'm so glad I went with it.

Update: I liked the case so much I bought another one for my basement. In my second build I was able to do another hard line sli loop. This one I did with two 360mm rads. The front cover doesn't fit with the radiator on the outside of the case. It gets 5 of the 6 snap pins in. It doesn't clear by 1/8" so it's not the end of the world. Very nice case for the money. Fits large modular power supplies by removing the 3.5" disk tray. Has fan controller which is nice. Good airflow, but needs 3x 120 or 2x140mm fans to keep temps reasonable. Can fit 2 360mm radiators, possibly 2 420mm radiators.

Great case. PCIe slots are soldered on so you have to break em off. Other than that make sure your motherboard doesnt have a giant pcie are or the exhaust fan will become an obstacle

THERES SO MUCH ROOM FOR CABLE MANAGEMENT IN THE BACK I LOVE IT. It's not a light weight case by any stretch, but it's definitely sturdy. The onboard RBG fans look great as you'd expect from msi. The sag bracket is adjustable too, which is nice if you don't have a full sized card but want the aesthetic. It's also super quiet so far.

Muy buen producto, cumple con lo que dice

Great airflow, goes on sale often. My go to

Easy to support ATX

Muy buen gabinete y muy buena atención, además venía de regalo un dulce:)

Looks good