🌡️ Keep Your Cool with Thermal Grizzly!
The Thermal Grizzly PhaseSheet PTM is a high-performance thermal pad designed for optimal heat transfer in CPUs, GPUs, and other electronic components. With its phase change material, it remains solid at room temperature and only liquefies at 45°C, allowing for easy application. Its non-electrically conductive nature ensures safety for sensitive electronics, while its durability guarantees stable thermal conductivity even after multiple thermal cycles.
A**S
Best Thermal compound
1) Works better than Grizzly Kryonut thermal paste in terms of thermals2) Easy to apply. You can follow the instructions and put it in the fridge. Or you can apply it to the CPU, take a can of air, turn it upside down, aim the straw at the CPU and squeeze for 2 seconds. It should freeze the compound. Then take off the plastic with tweezers.3) It's reusable since it turns from solid into a liquid every time. If you're switching to a different cooling solution. 80% of the compound is squeezed out around the sides of the CPU. Just collect those leftovers, place them on top of the CPU in bonfire method (Pea method) apply the cooler. Once you turn On the PC, It'll turn to liquid and 80% of the compound will squeeze around the CPU. Then tighten the cooler again.
Z**R
Dropped my GPU hot spot 20-30 degrees
This worked wonders for me. My RX7900 GRE that is under a year old started overheating and shutting down my system. My temps were only around 60c but I had a hot spot temp of 100-110c under load.I decided to repast my GPU with this and now my system sits at 60c with a hotspot of 79c after an hour stress test.I found it was easy to apply following the instructions and it fixed my problem.
I**E
Fantastic for thin laptops that struggle to cool themselves from factory.
My 2019 MacBook Air was ceaselessly thermal throttle and hit its temperature ceiling, even though I swapped the old thermal paste. Applying this to only the CPU die (not the PCH) resolved the issue. It still slows down under maximum load, it quickly stops throttling and the temperatures return to normal. This was easy to apply and, although it’s somewhat pricey, the performance increase is notable and it’s easier to apply than normal paste. At first, the square seems small, but the tiny portion needed for application shows just how much is actually included with this.
D**G
Easy to use, works well, takes some time to break in
They seem to work well. Easy to use when you put it in the freezer for a bit. Just make sure you take off the plastic! It takes a few days to break in but you should see a 5-10 degree difference in temperatures. I did atleast.
R**7
Runs a little warmer than fresh paste, but shouldn't "pump out" like paste does.
This stuff works great, I bought this for my laptop because the Arctic MX-6 paste I have been using rapidly degrades in performance. The initial performance is amazing, but it takes only about a month for it to cool like some old dried out paste that was five years old or something. This product keeps my laptop almost as cool while gaming, but is expected to maintain that performance for a very long time. I had no issues at all installing it for the first time, I suggest reading and following the instructions that are provided for best results. The only thing I wish I had done differently was to have a micrometer to measure the CPU and GPU die size instead of just eyeballing it, and to have a sharper set of scissors to cut the pad down.
R**.
Awful temps even at stock.
Awful temps right now, I'm idling at 60 C with a Noctua DH-15 on 13700k running at 5.3. Every thermal compound I've bought from Thermal Grizzly only last 4 or 6 months before it dries out. Hoping the phase changing nature of this thermal paste would save me but nope. Done with Thermal Grizzly.
S**T
Effective and easy to apply
For the relatively low price, it's really easy to install if you follow the included instructions and so far pretty effective. Once you get a few thermal cycles in, spikes decrease and overall performance increases. On my ryzen 7 9800x3d with a 240mm aio, I'm seeing an average of at least 5°C lower temperatures under load, with my idle temps being around 8°C lower. You can trim the pad to fit your cpu, so it's compatible with pretty much any processor. The packaging kept it perfectly flat too, so no worries on it being folded, not that it would matter much since both sides are covered. Just make sure you follow the instructions and freeze it for a few minutes before you try to work with it, it makes it easier!
M**S
One week so far. (check back after a year)
After a week, this is fantastic. Was using Thermal Grizzly Kryonaut Extreme paste for a year and got 85/67 degrees on my p-cores and 3-cores running cinebench for 10 minutes. After a week with the pad, I am getting 80/63 after 10 minutes. Maybe not a lot to some, but I am highly overclocked.(Just so you know the Kryonaut lowered the temps like 9 degrees over a cheaper paste)No problems installing the pad, Just take your time and use an Exacto knife to help separate the pad. CAREFULLY!
Trustpilot
3 weeks ago
3 weeks ago
