xTool SafetyPro AP2 Smoke Purifier for Laser Engraver, SuperCyclone System 6-Layer Filtration for Dust & Odors, Quiet Operation for Diode Fiber Laser Engraving Machine and CO2 Laser Cutter

The xTool SafetyPro AP2 Smoke Purifier has made a huge difference in my laser engraving workspace. The build quality feels solid and purpose-built, not like a generic air purifier repurposed for lasers. The 6-layer SuperCyclone filtration system does an excellent job capturing dust, fine particles, fumes, and strong odors from engraving and cutting. Even during heavier jobs, the air stays noticeably cleaner with far less lingering smoke or smell. I really like how it automatically syncs with the laser, turning on and off as needed, which makes it feel like a seamless part of the setup. It’s also surprisingly quiet for how powerful it is, making it comfortable to use indoors or in shared spaces. Filter life will depend on usage, but the performance easily justifies it. If you use a laser engraver indoors and care about air quality, this purifier is absolutely worth it. Highly recommended.

It's efficient and quiet. I like that I can clean out the filters to make them last longer. Easy to set up and works automatically on Mt Xtool P2S.

A bit loud, but works great. Cutting wood produces no smell at all with this attached (at least until you open the top of the laser)

Customer service for xtool is excellent and they provide feedback quickly and with extra information to help you resolve your issues. I really like using the A2 especially for acrylic cutting and so far I have had projects with acrylic, rubber, tumblers and wood. The wood cutting puts out alot of smoke so as with any laser you will need a good amount of fan and filter to disappate the smoke. The A2 does work well to decrease the smoke with new prefilters. Replacement filters are not expensive for the amount of filtration it provides. Although I have my laser in my garage, The A2 eliminates the odor and and smoke very well, I feel that I could use it indoors.The A2 is easily controlled through the software so you can see the life of each filter so you can keep up with when to replace.Thanks to Xtool for following up multiple times ro make sure that I was taken care of. 👍👍

Good product, eliminates the smoke like it's supposed to.

Works great

XTool is an amazing brand, and this helps me easily make inside my home without exposure to nasty contaminants that come from making. It does get rid of most of the smell, as well. The size is great, making it fit well under the table my laser is placed on. Easy to use with standard power in my home and the design is very "Apple-like". The only problem I have is that it says it is clogged (which it is not) as soon as you hook up the hose from the tool to the filter, and the exhaust hose out of the filter. I have contacted support and it seems as though the first particulate filter being removed fixes the issue and allows enough air flow to not throw the error. They have sent a second particulate filter and I have run through the troubleshooting steps to solve the issue, but it persists. While they are responsive, it seems there is an issue with the air flow for no reason that cannot be solved. (This machine hardly has any hours on it.) Still works and doesn't seem to be exposing me to anything, though I have bought a second air purifier from Amazon to use in the office, next to this one. Hoping I don't die early from exposure, but would love the peace of mind of this device not telling me constantly that the air flow is blocked and my filtration effectiveness may be reduced.

Works great and really helps draw out all of the smoke from my engraver

Upgraded from the previous Smoke Purifier that xtool had which you could still smell smoke. This unit does a far better job at purifying and the smell is far less. The automatic feature while using with a xtool S1 is fantastic

I’ve used XTool lasers since the time they used to sell them under the “Makeblock” brand. Long before the spinoff… I loved the brand so much that when I bought a Bambu lab H2D full laser combo, I decided to buy the AP2 for a few reasons: software/firmware updates, wireless connectivity , multiple filters, easy to replace, it just works… However, after buying it I find out that IF you don’t own a modern XTool laser, you will not be able to: use the software, update the firmware, keep track of the filter life, Bluetooth connection doesn’t work with anything other than the few lasers, the iOS/Android/PC connection doesn’t exist except if you have their lasers… So, that means that any other laser out there is only compatible with the XTool AP2 on “manual mode”. I mean that’s fine BUT(to clarify, XTool does claim that their AP2 works with the H2D but doesn’t really tell you to what degree …) Dear Makeblock, at least make the ‘filter life’, ‘firmware updates’ and ‘Bluetooth’ work with iOS/Android without the need of an XTool laser. I feel you guys have made the $1300+ product shrink down to a $600 product level and I just tossed $700 down the drain for no reason … it is truly sad to block off features that make your product stellar… UPDATE: I decided to return it since there is no real advantage between this filter and other alternatives (most advantages are not available). However, the box stickers states that it is 15kg+, ACS says it is 20Kg, and Canada Post says it is 26Kg+… in short CP refused to take it. Now , I have to arrange for a third party courier to return this “overweight” box. The assigned courier is CEVA Logistics, according to them it might take 14 days for them to pickup the package. UPDATE 2: XTool reached out to me after posting this. According to them , the AP2 firmware can be updated without an XTool laser via Bluetooth ( contrary to what their original CS told me first via their website ) .