SVSSPWADAPT Soundpath Wireless Audio Adapter - Black

Day 1 of using this and so far so good. Paired immediately and sounds great. Have it plugged into my Klipsch Flexus Core 200 and paired with a separate 12 inch Klipsch sub. Sounds the same as with the cable I was using. Highly recommend this as I have been burned before.

First off, if you're looking for a wireless subwoofer kit, do not purchase the - Dayton Audio Wave-Link WLS System 2.4 GHz Full Range Wireless Audio Transmitter & Receiver System (pictured below)...STRAIGHT GARBAGE. Just as others have mentioned, the pops/humming while running that setup are atrocious. I got so tired of reconnecting/repairing the transmitter and receiver...so it was time to try a different kit. Long story short. I decided to give the SVS Soundpath wireless system a go. WOW...problem solved. They paired as soon as I connected them, and their performance has been flawless. A bit spendy, but worth every penny. Going to purchase an additional kit for another system I have. Now I'm enjoying my main system as I should be...

This product worked right out of the box for me to connect my SVS (or any brand for that matter) Subwoofer wirelessly to my AV Pre/Pro. The directions are well done and the process took me 5 minutes or less. I plugged the power in to the base module that connects to the AV Pre/Pro, then connected what is a Line-In cable to the base module on one end and an RCA on the other end in to my Subwoofer In. On the other end, I did the same thing but with Stereo RCA Cables on the end input to the Sub.These connect automatically with each other so no manual sync was needed. There are blue lights on both devices that light solid to show they are connected. My Sub worked immediately. As far as quality, I did not notice a difference at all during movies. Response was fast, quick and tight.The only two considerations I would give this product are:1) Make sure obviously wherever you use these, power is available on both ends. In the case of the sub, you would need two outlets, one for the sub and one for the connector module.2) The blue lights are on showing a connection at all times, but you can tape over it if needed. Good to be able to see they are connected.3) All needed cables are included but they feel pretty flimsy to me, but I could not notice a difference in audio. Just thinking I will probably upgrade them at some point for whatever incremental difference that might make.Overall, the product worked great, set-up quickly and solves a major problem with cable clutter. Home Run.Edit after a month:I have purchased two more of these for three total.-I tried using one of these with the Transmitter next to my Sonos Connect and it immediately interfered with the signal. I tried to again just to be sure it the same thing. So, I could adjust my Sonos Channel, but I am not sure I want to do that as my Sonos is working very smoothly right now, so I moved this unit to a different space.-The blue lights on both ends are always on when connected so in a dark room, you will have those and probably need to put tape on them or something unless you don't care.-One of mine that is connected is now going about 30 feet and through walls which is great, but another is going 17 and the sub end flickers every now and then during movies with direct line of sight. It happens maybe 3 times during a two hour movie. I need to tweak this.Overall, still very happy, but I am leery of the Sonos interference. Although downstairs I do have one next to my Sonos Amp and it does not interfere.

I purchased this product for a slightly different reason that most purchasers. I have two subwoofers in my home theater, one in the same equipment cabinet as the receiver, etc., and one at the rear of the room. There is, in fact, an wired audio extension built into the room from front to rear. However, since the rear sub plugs into a different outlet I was getting an excessive amount of 60Hz hum (probably due to a ground loop) in the rear sub. Even when both the receiver and main sub were powered from a balanced power isolation transformer and the rear sub likewise (a different power unit) I was still getting excessive hum. I then purchased this product to provide total electrical isolation between the two different subs. The only connection between the two is the wireless connection provided by the Soundpath unit. Since there cannot be a ground loop in such a system I have completely eliminated the 60Hz hum caused by powering the two subs from different electrical circuits. I do have one criticism of this product, resulting in the four star rating. Both the USB power cord and the audio connector cable are only two feet long. This is just a little too short to be entirely convenient. An extra foot for each would bring the product up to a five star rating. One strange quirk I noticed is that, although the DC power supply for the transmitter worked when plugged into a balanced power isolation transformer, the receiver power supply would not (different brand of isolation transformer). I have noticed this anomaly in another power supply for a different product, although I have a dozen or so power supplies that do work on the same isolation transformer that this product's PS would not. Fortunately, I was able to power the receiver PS directly from a wall plug. Just providing DC to a device in this manner will not create a ground loop, which can be created by an line level audio connection between two devices that are on different mains circuits.