Laser Engraving Machine, Woxcker L2 MAX 5.5W Enclosure Laser Engraver, 300x300mm Bed Size 0.01mm High Precision Laser Engraving and Cutting for Wood Leather Glass Acrylic (Class 1 Laser 5500mW)

While I do plenty of my own DIY projects, including woodworking, I had never had a laser engraver and I wanted to try one on the cheaper side of things. This one fit the bill under a thousand bucks and with a 5.5W diode laser. The whole thing sits on various t-slot profiles that seem very stout and are easy to put together with the included hardware and tools - though I did use my own hex bit screw drivers. There were 3 manual booklets in there covering various aspects of the hardware and software setup - but the installation was pretty clearly explained there. The only weird part was that the tie rod connection step was incorrectly marked - no biggie since it's easy enough to figure out the way the connection needs to happen (it's in one of my pictures as well). It's not heavy once put together, I was easily able to carry it downstairs and to my garage where I operated this the first time with my garage door open and an external fan blowing at it just to be safe. Speaking of safety, it comes with both the enclosure that prevents eye damage if you look at the laser indirectly, as well as a set of safety glasses - and I doubled up by using both as you probably should. The front edge of the enclosure also rests on a little red switch that will automatically shut off the laser if you open the cover. The cover/enclosure also has a built in fan to ventilate fumes from inside. The engraver comes with a little MicroSD card that has its drivers on it among other things. It is compatible with popular tools like LaserGRBL and Lightburn, but I decided to test it with the bare minimum in setup time that I could throw at it to see what kind of results that would yield with no fine-tuning. in that respect, I ended up using CutLabX on my phone (a somewhat barebones app, at least not the nicest UI), not changing ANY settings on the app, putting the laser all the way down (a quick and dirty attempt at focusing the dot if you will) and running my first job with an uploaded drawing from my phone engraved on an old somewhat-misshapen piece of plywood I had sitting around. Basically, give the engraver the bare minimum of everything, expecting a poor result, and seeing what it actually delivered. The Woxcker handled this little torture test with aplomb! You can see the end result is more than acceptable given the conditions, and it was very quick doing it. Since then I've tried jobs using the other PC-based apps and some fine tuning and it has performed even better. For the price at the time (and it looks like it's on sale now), this thing gets a recommendation from me!

I’ve been wanting to get into laser engraving for awhile now and so far I am really impressed with this machine. This is a 5W laser which seems to be a good place to start for newbies. I have tried out the laser on a few materials so far (wood and stone are pretty fun—I haven’t figured out glass just yet) and have had lots of fun in the process. I have not had any major issues so far and it’s been an easy process throughout. Setup was easy, although it took a bit of time. If you read the manual and/or watch the installation guide video (comes on the flash drive that comes with) you’ll be fine. I didn’t love putting it together, but I hate putting IKEA stuff together—so that tracks for me. Very nice quality machine—it feels solid and heavy duty. The enclosure is light, but not in a flimsy way. The only problem I had while setting things up was with the enclosure—and it was really my fault. There is a little red button—make sure this button is pressed down when you close the lid or the machine will not work! It took me far too long to figure out this little tidbit. However, for eye safety, it is great that when the lid is lifted it turns off! I just wish I would have realized my mistake earlier. I have been using my laptop with Lightburn to engrave so far. There is a free program you can use as well—and also some apps for phones. I have not used these yet as Lightburn makes everything really easy to do. Tech support has been responsive, answering my emails within the next business day or so. This has been a really fun tool to use the last few days. It is easy to use, nicely priced for what you get, and solidly built.

Sucks! Can’t connect any computer! No response from sender or company!! Would not buy from them again!! I have sent several emails asking 4 help! Nothing! Pissed!

This is an easy to use laser engraver and perfect for learning. Being expandable for different laser heads. Perfect for engraving on leather.

I was interested to get into laser engraving, and this price point was a nice entry point. It wasn’t very difficult to put together, I did have to follow the directions closely, but got it done. The machine does need to run off a program so you have several choices of what kind of programs to use. I used one that was free and got it set up pretty easily. Overall, the machine is excellent, it runs nicely off the program, it’s light weight and I can easily move it around. I’m having fun experimenting with different materials and different designs. I think this is going to be a lot of fun.

I’m truly impressed with the Woxcker L2 MAX laser engraver. The setup was straightforward, and the machine is very precise, even with fine details. I’ve used it to engrave wood, acrylic, and leather, and the results have been amazing. It’s quiet, efficient, and the safety enclosure is a great plus. This is a fantastic machine for hobbyists and small business projects. Highly recommend!

als Bastler habe ich mir eine Graviermaschine zusammengebaut und diese Platte passt perfekt dazu. und für diesen Preis ist sie sehr attraktiv. also die Qualität ist recht gut und der Preis sticht im Vergleich zu anderen Anbietern hervor. also ich bin sehr zufrieden.

Ho appena provato il tappetino di sicurezza per incisore laser con piano di lavoro a nido d'ape e sono davvero soddisfatto! Le dimensioni 330x330x10mm sono perfette per il mio setup, e il design a nido d'ape fa davvero la differenza, proteggendo la scrivania dalle bruciature e migliorando la qualità dell'incisione. È stato facile da installare e ha reso tutto più pulito e sicuro. Non devo più preoccuparmi di rovinare il piano di lavoro ogni volta che uso il laser. Inoltre, è un ottimo supporto per mantenere i materiali stabili durante l'incisione. In sintesi, questo tappetino è un acquisto fantastico per chiunque lavori con un incisore laser. È pratico, efficace e protegge sia i materiali che la scrivania. Lo consiglio vivamente a tutti i maker là fuori!

Lavoro quotidianamente con un laser professionale e mettendo a confronto questi componenti Woxcker (destinati ad uso amatoriale) con quelli professionali sono rimasto piacevolmente sorpreso dalla qualità di altissimo livello dei Woxcker. Il pannello protettivo per le superfici è un accessorio indispensabile per proteggere i piani d'appoggio, purtroppo spessissimo non rientra nella dotazione standard dei laser consumer. È realizzato in metallo verniciato, ad intuito sembra un pannellino di acciaio, ma non ne sono certo. Il supporto a nido d'ape è ben fatto, rifinito anche questo in modo impeccabile e soprattutto molto robusto. È un piano perfetto, non è ondulato e questa caratteristica non è scontata neppure con i supporti professionali costosissimi. Le dimensioni 33x33 cm sono idonee per lavorare superfici medie con i laserini linea hobby. Nel complesso ho apprezzato questi accessori, valgono il loro costo. Consiglio l'acquisto.

Der Honeycomb Arbeitstisch mit den Maßen 330 x 330 x 10 mm ist eine ideale Schutzmatte für Graviermaschinen und Schneidmaschinen. Dank seines Wabenlochdesigns verbessert er den Schneideffekt erheblich, indem er Rauch schnell abführt und Verbrennungen verhindert. Die robuste Zinklegierung, die durch hochpräzise CNC-Bearbeitung hergestellt wird, sorgt für Langlebigkeit und hohe Temperaturbeständigkeit. Ein besonderer Vorteil ist der doppelte Schutz durch das mitgelieferte Pad aus Aluminiumlegierung, das unter die Wabenplatte gelegt wird, um den Schreibtisch vor Schäden zu bewahren. Die glatten Kanten, die durch den Kaltwalzprozess entstehen, verhindern Verletzungen beim Umgang mit der Platte. Praktische Skalen auf der X- und Y-Achse sowie der Rückwand aus Aluminiumlegierung erleichtern die schnelle Messung von Gravur- und Schneidmaterialien. Die große Kompatibilität des Honeycomb Arbeitstisches mit verschiedenen Gravier- und Schneidmaschinen macht ihn vielseitig einsetzbar. Mit seiner moderaten Größe und Dicke passt er zu den meisten Modellen auf dem Markt. Der Arbeitstisch bietet eine ausgezeichnete Stabilität und Präzision bei Schneid- und Gravurarbeiten. Seine hohe Qualität und Funktionalität machen ihn zu einem unverzichtbaren Werkzeug für jeden, der regelmäßig mit Graviermaschinen arbeitet. Die einfache Handhabung und die Schutzfunktionen tragen dazu bei, die Lebensdauer sowohl des Arbeitstisches als auch der verwendeten Maschinen zu verlängern. Der Honeycomb Arbeitstisch überzeugt durch seine durchdachte Konstruktion und die praktische Anwendung im Alltag. Die Messskalen und die robuste Bauweise gewährleisten präzise und sichere Arbeiten, was besonders für professionelle Anwender von Vorteil ist. Durch den verbesserten Schneideffekt und die Langlebigkeit stellt dieser Arbeitstisch eine wertvolle Investition dar. Insgesamt bietet der Honeycomb Arbeitstisch ein hervorragendes Preis-Leistungs-Verhältnis für alle, die hochwertige Gravur- und Schneidarbeiten durchführen möchten.

Aus der Beschreibung und den Bildern geht hervor, dass es sich um ein Lasergerät handelt, aber ich war schockiert, als ich nur ein Panel ohne Laser bekam, und ich denke, dass das Panel teuer ist.