KF04060BK Body Mount Bushing Kit for Ford F250 F350 Super Duty 2008-2016 2WD 4WD Polyurethane Body Cab Mounts & Steel Sleeves & Hardware (Red)

These mounts are very reasonably priced, and provide a nice stiff ride for my truck. The polyurethane gives you better feel for the road and tighter performance in my opinion. This job to replace is very tough, bolts to be removed have factory lock tite and you cannot use impact or you will break the cage retainers on the top side. Old fashioned strength and persistence will prevail, be prepared to be tired and body sore after install. I would recommend these, very good price compared to what you could spend, just be sure that you understand the ride will be more stiff that factory.

A little stiffer than stock, but got the ride quality back to where it should be. Ford should’ve used better quality from the factory.

My husband ordered these for his truck and they fit perfectly. They were easy to install, and the durability is great. I would definitely recommend.

Installed these on my 2015 f250 platinum. They look like good quality and truck rides way better. Hope they last.

Esencia

It don't come with nuts and the lower caps do not have threads like the factory ones so I'd you can't get yours apart and have to cut them out and can't use your own factory hardware then you have to go buy nuts and washers 1/2 x 1.75. Nice to know. Especially when you are half way through the job and then gotta run out to get them other then that they worked time will tell the quality of them.

Truck I bought had no cab mounts these fit great and rode great. For 75$ I cannot complain

Fit perfect came with everything you need. Make sure to heat all 8 old bolts to break the lock tight free or you will have to pull up the flooring to get to the nuts. I had one that 3 out of 8 sieze up anyway and had to get to the nuts. Make sure take all 4 out of one side to be able to lift cab frame easily with jack and a cut piece of 4x4 to be able to insert the new and extract the old. Put lock tight on new bolts and tighten down nice and tight. I read on hear someone was hearing noise so I put a thin layer of high temp grease I had lying around on all surfaces that touched together on 8 of the new bushings as well as buffed all old rust and rubber off and mine was rusted really bad. Since I have had everything back together I have no issues whatsoever. Rides like it should. Thanks.