M MINGLE High Pressure Washer Hose Reel 150ft, Heavy Duty Steel Hose Reel, Manual Crank Power Washer Hose Reel with 3/8" Pressure Wash Whip Hose, Swivel Arm and Mounting Bracket, 4000 PSI

I use this hose real on a daily basis. It has held up well. It is very well made and very sturdy.

I pressure wash for a living and purchased this reel to replace an old one that finally gave out. I don't normally run my pressure washer hose through the reel as this can damage the reel and the hose because when more than two rows of hose are wrapped around the reel and the pressure washer is being run, the pressure can cause the hose to swell and can crush the reel like a boa constrictor which also damages the hose as well. I just strip off what I need and connect it to the machine. My machine is trailer mounted and is parked on the street when I do residentials. 99% of the time, I use 200 feet of hose. I only use single wire hose because it is more flexible when I'm working around furniture on decks and cheaper than double wire and this allows me to fit 200 feet of hose on this reel since single wire hose is a little thinner than double wire hose. Another reason I don't run the hose through the reel, is because the hose they supplied the reel was mounted to a 90 degree (right angle) fitting and a right angle fitting can reduce flow by up to 25% and this is significant when you use long hoses. Water flow is just as important as water pressure, so I don't have any bends in my hoses. As a bonus, I saved the hose they sent with the reel for my surface cleaner because it won't be long before I'll need to replace that hose too, which if purchased separately would be about $30 - $40. So, to me, the extra hose reduced my reel cost to $95.I will be purchasing another one of these reels for another machine and I'd recommend this product to anyone needing a high pressure hose reel. Only took about 15 minutes to assemble without the "thru hose" and about 15 minutes to drill the holes to mount it on my trailer.

Great real only reason I didn’t give it a five star was the weight. It makes the pressure washer very top heavy. Other than that it works great! I use it weekly with my better hose to unstop sewers up to 4”.

Not as heavy duty as the big brands but good enough quality for this price point. The lock is not strong enough to hold the shock load of a 4GPM machine. I just strap the handle down to my rail.

The media could not be loaded. Less than a year of ownership. Unit has developed a crack in the main tube that carries hp water, just before it connects with the plastic knob for hose disconnect. The metal tube is either garbage or the Chinese welder didn’t do a good job! Either way it leaks and is now useless!

Works great on my power washer

Nice overall design, but poor execution. There is a 3/8" 90 female fitting that you must attach your washer hose to through a cutout in the reel wall. On my unit, the 90 is facing the opposite direction from being able to use the provided hose clamp to create a loop. What's more, if the 90 could be rotated towards the cutout, there would be no need to run a big loop on the outside of the reel which will hit your arm when turning the handle. I put a crescent wrench on the 90 and it won't budge. I heated it up and it still won't move. So I'm stuck with a circus looptiloop or multiple 90s that will reduce flow. Instead of gluing on a 90, the manufacturer should include a couple of 45 degree street 3/8" npt angles with teflon tape and #5 pipe dope. There also needs to be a 3/8" female quick connect to 3/8" male npt thread. The only included connector is the older style m22 which is less preferred to quick connects. Another option would have been for the manufacturer to provide a short piece of hose with a quick connect on one end so you aren't forced to radically bend an expensive longer hose and it can easily be disconnected for separate use.

Very useful